recommended pcb layout travel "t" 21 3 5.0 (.196) 4.0 (.157) 0.5 (.019) 1.5 (.059) 13.0 (.511) 3.6 (.141) 7.3 (.287) 0.5 (.019) 2.0 (.078) 2.1 (.082) 1.8 (.070) dia. 6 plcs. 1.5 (.059) 3.0 (.118) "t" + 20 (.78) "t" + 10 (.39) recommended pcb layout travel "t" "t" + 5.0 (.196) 4.0 (.157) 0.5 (.019) 1.5 (.059) 13.0 (.511) 3.6 (.141) 7.3 (.287) 0.5 (.019) 2.0 (.078) 2.1 (.082) 1.8 (.070) dia. 6 plcs. 1.5 (.059) 3.0 (.118) "t" + 2 2 13 13 3.0 (.118) 20 (.78) 10 (.39) 2 13 schematic single gang 2 2 13 13 schematic dual gang features carbon element 10-30 mm travel center detent option single or dual gang rohs compliant* pdv series - open frame slide potentiometer *rohs directive 2002/95/ec jan. 27, 2003 including annex and rohs recast 2011/65/eu june 8, 2011. speci cations are subject to change without notice. the device characteristics and parameters in this data sheet can and do vary in different applications and actual device perfor mance may vary over time. users should verify actual device performance in their speci c applications. electrical characteristics taper .................................... linear, audio standard resistance range ....................... 1 k ohms to 1 m ohms standard resistance tolerance .....?0 % residual resistance ....................100 ohms or ? % max. environmental characteristics operating temperature ...-10 ? to +50 ? power rating linear .....................................0.1 watt audio ....................................0.05 watt maximum operating voltage - linear 10 mm travel.........................100 vac 15 mm travel.........................100 vac 20 mm travel.........................200 vac 30 mm travel.........................200 vac maximum operating voltage - audio 10 mm travel...........................50 vac 15 mm travel...........................50 vac 20 mm travel.........................150 vac 30 mm travel.........................150 vac sliding noise ........................ 47 mv max. mechanical characteristics operating force ............. 20 to 300 g-cm detent torque ................. 50 to 400 g-cm lever stop strength ........... 3 kg-cm min. sliding life ......................... 10,000 cycles std. stroke length ..... 10, 15, 20, 30 mm soldering condition wave .............. 260 ? for 3 sec. max. manual .................... not recommended product dimensions dimensions: mm (inches) how to order pdv 10 - 2 1 p - 102 a model length of travel ?10 = 10 mm ?15 = 15 mm ?20 = 20 mm ?30 = 30 mm detent option ?2 = no detent ?3 = center detent number of gangs ?1 = single gang ?2 = dual gang mounting type (refer to drawings) ?p = vertical pins ?m = horizontal pins resistance code (see table) resistance taper ?a = audio taper ?b = linear taper other styles available. *rohs compliant pdvxx-x1p pdvxx-x2p the model pdv series is currently available, but not recommended for new designs.
applications audio/tv sets car radio ampli ers/mixers/drum machines/ synthesizers pcs/monitors appliances speci cations are subject to change without notice. the device characteristics and parameters in this data sheet can and do vary in different applications and actual device perfor mance may vary over time. users should verify actual device performance in their speci c applications. pdv series - open frame slide potentiometer product dimensions dimensions: mm (inches) derating curve ambient temperature (c) 20 40 50 60 70 80 90 100 30 10 0 20 33 40 60 80 100 0 rating power ratio (%) standard resistance table resistance resistance (ohms) code 1,000 102 2,000 202 5,000 502 10,000 103 20,000 203 50,000 503 100,000 104 200,000 204 500,000 504 1,000,000 105 7.3 (.287) 5.0 (.196) 1.0 (.039) 4.0 (.157) 13.0 (.511) 3.6 (.141) 2.3 (.090) 1.8 (.070) 2.1 (.082) 2.0 (.078) 1.0 (.039) ??+ 10 (??+ .393) 3.0 (.118) 8.5 (.334) recommended pcb layout 1 2 dia. 5 plcs. n/c 3 n/c 7.3 (.287) 5.0 (.196) 13.0 (.511) 4.0 (.157) 1.0 (.039) 3.6 (.141) 2.1 (.082) 2.0 (.078) 2.3 (.090) 3.0 (.118) 8.5 (.334) 3.0 (.118) ??+ 10 (??+ .393) 1.0 (.039) 1.8 (.070) recommended pcb layout dia. 6 plcs. 21 3 1 3 2 pdvxx-x1m pdvxx-x2m 2 13 schematic single gang 2 2 13 13 schematic dual gang rev. 11/13
|
